10) What Does It Mean: Scope and Flat?

Hey! Hi. This page is was duplicated at the Training Courses site, with new edits, at:What Does It Mean: Scope and Flat?

Please use this new site, since it will be the most up to date and it will come with new features. Thanks!

:

The first question: Why Do We Care?

Every Answer begins the same way: There are many things that can go wrong with the presentation of the moving picture.

In this case, we are working with the shape of the picture. Movies evolved from almost square to very wide.

This topic is a little tricky. Even if the shape is wrong – too narrow or too short – at least the image is on the screen. In some cases, the images may look OK if you just glance at the image. But there are things to look for.

Will the audience care? Many will. They will think that the screen looks too small, or the image looks too small. (Nobody ever complains about too big!) They may complain that the people on screen are too thin, or too fat.

Buzzwords: “Scope” “Flat” “Format” “Constant Height” “Constant Width” “Aspect Ratio” “Two-Three-Five” “One-Eight-Five” (written 2.39 or 1.85 and 2.39:1 or 1.85:1). We will show the definition of these terms with examples. Don’t look them up now – they have too many meanings and most explanations are more complicated than we need to be.

The Complication: There are 2 correct forms for an image on the screen. Even in the same facility, some auditoriums may be one type, and other auditoriums may be the other type!

Masking and Curtains in a Cinema Auditorium

Potential Points of Failure: Screen. Curtains. Motors for Curtains. Cord for Curtains. Masking. Motors for masking. Chains for masking. Automation Electronics. Projector. Automation setting on Playlist. Instructions that tell which setting to put into the playlist!


Don’t let this get too complicated. We are only talking about the size of the rectangle of the movie on the screen.

Movies are created in 2 different shapes. The measurements for both of them is just about 2 times as large side to side (the width) compared to the dimension from top to bottom (the height). For example, the following picture shows this concept of a rectangle that is 2 times wide and 1 times high.

A pretend cinema screen two times wide and one times high

A simple way to write this is ‘2 to 1’ or ‘2:1’, which means 2 units in one direction compared to 1 unit in another direction.)

The important things to remember is:

There are two formats

One format is slightly smaller than 2 times wide and 1 times tall – that format is called Flat.

One format is slightly wider than 2 times wide and 1 times tall – that format is called Scope.

Here is a picture of those 2 formats placed with our 2 to 1 picture.

Two to One, with Flat and Scope

The choice for this happens very early in the movie making process – probably during the first hours of conversation between the producer and director, or sometimes the director and the cinematographer. Will we shoot this movie wide or do we shoot this movie tall?

Of course, they don’t use those terms. Art and Science are never that simple – there are always special words, or words with special meanings. They choose between “Scope” or “Flat”.

There is no rule that says a movie should be one way or the other. Sometimes a director will only work in one form, then suprise you by making a movie in another. Or, sometimes people will say that all action movies are in Scope. But a little research will show that isn’t always true.

Anyway, after the director’s decision, every scene of that movie will be shot through a lens that is in that form – what is called a format. And of course, the last lens of the movie process – the lens that is attached to your projector – will make the movie appear in that format on your screen.

Here be dragons!Maybe you remember those old maps with the ship at the edge near the sign that says: Warning – Here Be Dragons~! Well…Warning — Here Be Maths~! …and, yes, we promised to keep math to a minimum. But there will be drawings too, with arrows and bright colors. So, be brave.

Auditorium Equipment LayoutLike many of these lessons, this information is useless until there is a problem. Then the boring background information becomes very important. Some of your audience may notice and complain …or maybe they don’t complain. They just feel uncomfortable for some reason – they never come back. But you’re a pro, so let’s go.

The background of the issue is that some directors and producers feel that their movie needs to be wide and expansive – big desert scenes and lots of characters spread out wide…or single lonely characters shown against the hugeness of their environment. But the director might feel that their movie should be close and snug – a focus on a character in a character-driven story.

In the auditorium, the subject of screen size is different than the subject of the size of the movie. The actual size of the screen is a choice between the cinema owner and the architect. They have to decide how wide the auditoriums are going to be. They know that the movies are going to be in Flat or Scope, but they need to compromise. They either decide to install a wide screen that is perfect size for Scope, or a tall screen that is a perfect size for Flat.

Here are some examples with pictures that show this.

Example 1: Imagine that they have a big tall space for a screen. A big Flat sized screen fills up the front wall.

Cool; a Scope picture will fit into that very nicely. Since they are the same width, we call this a Constant Width Screen. In this example have light blue and purple colors to show the 2 different screens, but of course, they are both really white. So, if a Scope movie is playing on this screen, there are 2 white bars on top and bottom, or, there will be masking that comes down from above the screen to cover a wider bar from the top.


Example 2: The next example is the opposite. They don’t have the space for a tall screen. But they have the front wall space for a wide screen. For comparison, these two example pictures are the same height. The Scope size doesn’t suffer, but the Flat size does.

Sometimes this is called Constant Height, and you can see why. The Flat movie has to shrink down to fit onto the Scope screen so they are the same height. In this case, if a Flat movie is playing on this screen, there are 2 choices: two white bars on either side of the screen, or black masking can be moved in during the Flat movie.

flat in scope, constant height screen


Example 3: The next example is actually more common. In a smaller room, usually the front wall is also more narrow. If there isn’t enough space for a big tall screen, there isn’t space for a wide screen. In this example, the Flat screen hight is the same as the Scope screen in Example 1.

So, again, we have Constant Width. The  Flat screen gets the same width as the Scope screen. Scope Image in a smaller flat space screen.

The question they have is: Do we begin with a Flat dimensions, which show the Flat movies perfectly but present Scope movies smaller – and with bars on the top and bottom? Or, do we start with the Scope dimensions, which show the Scope movies perfectly but show the Flat movies too small top to bottom, and with bars (or masking) on the sides?

Let’s imagine a perfect world where there are two different sized screens in two different sized auditoriums.

First is the Scope screen which is 2048 units wide by 858 units tall. You see the Star Wars movies and many big action movies in this format…but not all. Sometimes the director wants something different. For example, the most recent Spiderman movie (  Below that is the Flat screen which is almost the same width – 1998 units – but it is 222 units taller. 222 units is about 25% taller than the Scope size of 858 units. In numbers it may not seems like a lot. But imagine that your arm was 25% longer. Yeah…Avatar long hands and arms.

View of scope and flat screens with simple gradient imageHere it is in pictures. In a perfect world, the Flat image below is almost as wide as the Scope image above. But what is this dimension made of? Inches? Meters? Centimeters? It is very unlikely that you will measure 2048 inches or centimeters or feet or meters across. Yet, 2048 is a basic size of digital cinema.

To learn this simple trick, we have to get very close to the screen when it is play a test pattern. You will see the screen and tiny holes where the sound comes through. Then magically, it will become obvious – especially if you look at a grey or white patch – that there is a set of  blue and red and green dots almost on top of each. A very small distance from that set is another set of the same and another and another. These groups are the basic elements of the picture. Instead of saying “picture elements” all the time, we mix the words together and say ‘pixels’. The Scope picture is 2048 pixels wide and the Flat is 1998 pixels wide.

For comparison, the same is true if you look at a TV screen or computer monitor. Computer monitors don’t have a standard width. But the HDTV standard width is 1920 pixels. Recently though, the stores are selling 4K TVs. Even if they aren’t always 2 times wider, they do have 2 times the number of pixels…3,840. In the movie theater, the 4K projectors have 4,096 picture elements across.

We’ll continue this in Part 2 of What Does It Mean: Scope and Flat?